Healthy indoor air is essential if you want to live in a healthy home. Opening a window now and then helps, of course, but it doesn’t have any lasting effect. What your home really needs is a structural solution: a properly functioning mechanical ventilation system that extracts polluted air from indoors and automatically replaces it with fresh air from outside. And for ventilation systems to work properly, maintenance is essential. Whether you choose a D-system or the lower maintenance C-system, it will need occasional but regular cleaning to continue functioning as it should.
Ventilation in your home is not an unnecessary luxury
When you think of healthy living, you immediately think of a good diet, exercise, hygiene… but lots of people forget that breathing healthy air also needs to be added to this list. Especially if you know that we spend 90% of our time indoors on average, and that the air in our homes is often five times more polluted than outdoor air. This is because it’s full of CO2, VOCs (volatile organic compounds), moisture… and prolonged exposure to it can cause severe health complaints such as migraines, asthma and even cancer. You can easily avoid this, however, by constantly replenishing your home with fresh air from outside: extracting the polluted indoor air and replacing it with healthy, fresh outdoor air.
The need for structural solutions: installing a ventilation system
It’s a persistent myth that occasionally opening the window for 15 minutes completely remedies the problem. This does of course have a positive effect, but only for a short time. Research has shown that the air quality returns to its previous level just 20 minutes after closing the windows again. And you can easily test this with the Renson® Sense, our smart CO2 meter, which visually indicates when the air quality in your home is no longer healthy. The thing that you and your (properly insulated and airtight) home will gain the most benefit from, though, is a structural solution: a ventilation system. Because nobody wants to live in a fully sealed box...
Ventilation solutions for new and renovated homes
There are a number of different ventilation systems available on the market for new-build homes, all of which work in different ways: ventilation systems A, B, C and D. At Renson®, we offer systems C and D, because these are the most common ones on the market. We go a step further, however, by adding a ‘+’, because we provide smart, fully automatic, demand-driven ventilation solutions (system C+ and system D+), which only ventilate the required areas when necessary. For the renovation market, we also have the Renson Waves: a smart, decentralized ventilation system, which can easily be connected to existing air ducts.
The importance of a properly functioning mechanical ventilation system
You can sleep more easily if you have a ventilation system... This is generally true, but people sometimes forget that ventilation systems need to be cleaned occasionally in order to keep working properly. A system that is never cleaned will not function optimally, so your home won’t be filled with healthy air at all times.
Mechanical ventilation maintenance: C+ system and inlet louvres
System C+ supplies fresh air in a natural way via window ventilation systems, such as Invisivent Air or Invisivent Comfort, above windows in so-called ‘dry’ rooms (living room, bedroom…). At the same time, polluted indoor air is mechanically extracted via the Healthbox 3.0, our smart ventilation unit.
The C+ system requires less maintenance than the D+ system, because this ventilation unit does not contain any filters which need to be replaced regularly. Dirt and dust can accumulate in the window ventilation system, air ducts and extractor fans in the room. The vents and louvres should therefore be checked at least once a year, and the air ducts every 10 years.
Ventilation system D+ maintenance
System D+ regulates the intake of fresh air and extraction of polluted air fully mechanically. It’s a so-called mechanical ventilation heat recovery (MVHR) system. At the ‘heart’ of this system is a heat exchanger, which uses heat from the extracted indoor air to heat up freshly supplied (cold) air as it enters the home.
The system contains filters to trap dust, pollen and VOCs. The type of filter you have and the amount of pollution where you live determines how quickly your filter will become saturated. But when it does, it’s important to replace it. Failure to do so can compromise the system’s operation and efficiency.
Air ducts also need regular cleaning. If dirt accumulates in the ducts, their diameter is reduced, which results in less fresh air in your home than normal, so the system will struggle to achieve the same results. For optimal operation, it is therefore recommended to inspect the filters twice a year and replace if necessary, which is something you can easily do yourself. The heat exchanger should be professionally cleaned every two years and the ducts every five years.
Renson® Waves® (renovation) maintenance
If you are renovating an existing home, and decide to put in a new bathroom, kitchen or toilet, you might not want to install a central ventilation system. Your home has already been recently refurbished, so any more building or demolition work is undoubtedly not an option.
And this is exactly why we’ve developed Renson® Waves – a decentralized extraction ventilator that connects to existing air ducts in the extraction area. Just like the C+ system, Waves is a ‘smart’ system which will only extract polluted air when necessary, so when the sensors detect moisture, CO2 or VOCs. Another bonus is that Waves is very low maintenance, just like the C+ system. We recommend cleaning the air ducts every two years.