Linius L.050HF

Extruded aluminium profile with high air passage and a blind step of 50 mm. The physical free passage is 60%. Variable steps between 50 to 100 mm are possible. Frequently applied in cases where the step between the blinds reflects the aesthetics of the total project. The L.050HF blind can also be bent with a minimum radius of 800 mm.

Obliczenie przepływu powietrza

Specyfikacje

Dane techniczne

Alignment Horizontal
Blade height (mm) 50
Blade width (mm) 41
Weight per m² (kg) 8.5
Materiał żaluzji Aluminum
Kształt lamel Z
Type of blade Blade with wide opening
Visual free passage in % 70
Fizyczna wolna powierzchnia (%) 60
Surface treatment RAL - polyester powder coating; Anodized
Blade number used P07037
Maximum strain of the blind at 800 Pa wind load 1043
Material of clips Aluminum
Type of clips L.050.11; L.050.12; L.050.13; L.050.14
Typ budynku Apartment; Hospital; Office; School; Veranda
Typ koncepcji Project; New construction / major renovation; Small renovation
Net type Wire mesh 10 mm x 10 mm stainless steel 304; Wire mesh 20 mm x 20 mm stainless steel 304; Wire mesh 6 mm x 6 mm stainless steel 304; Wire mesh 6 mm x 6 mm stainless steel 316; Mosquito screen 2,3 mm x 2,3 mm stainless steel 304; Mosquito screen 2,3 mm x 2,3 mm stainless steel 316; Without wire mesh
Standardowy typ siatki Geen gaas
Extra options wall cover Curved; Lower blade; Door; Sill/threshold; Insect screen; Fasteners; Upper blade
Type of support LD.0065; LD.0195; LD.0240; LD.0440; LD.0460; LD.0995; LD.1250; SD.054; SD.100; LD.0070

Obliczenie przepływu powietrza

Specyfikacje na podstawie Państwa obliczenia

Przemieszczanie powietrza
kg/m³
m
m²
dB(A)
dB(A)

Przy pomiarach rzeczywista przepustowość kraty może odbiegać od wartości obliczonej teoretycznie. Dlatego przy kratach z mniej niż 6 lamelami zaleca się dobranie kraty większej niż wynika z obliczeń lub zwrócenie się o indywidualną poradę.

Wynik

Potrzebujesz pomocy w wyborze?

Nasi eksperci chętnie pomogą Państwu poradą dopasowaną do Państwa projektu.