Linius L.050HF

Extruded aluminium profile with high air passage and a blind step of 50 mm. The physical free passage is 60%. Variable steps between 50 to 100 mm are possible. Frequently applied in cases where the step between the blinds reflects the aesthetics of the total project. The L.050HF blind can also be bent with a minimum radius of 800 mm.

Luftstrømsberegning

Specifikationer

Tekniske data

Alignment Horizontal
Blade height (mm) 50
Blade width (mm) 41
Weight per m² (kg) 8.5
Materiale (lameller) Aluminum
Lamelform Z
Type of blade Blade with wide opening
Visual free passage in % 70
Fysisk fri åbning (%) 60
Surface treatment RAL - polyester powder coating; Anodized
Blade number used P07037
Maximum strain of the blind at 800 Pa wind load 1043
Material of clips Aluminum
Type of clips L.050.11; L.050.12; L.050.13; L.050.14
Bygningstype Apartment; Hospital; Office; School; Veranda
Koncepttype Project; New construction / major renovation; Small renovation
Net type Wire mesh 10 mm x 10 mm stainless steel 304; Wire mesh 20 mm x 20 mm stainless steel 304; Wire mesh 6 mm x 6 mm stainless steel 304; Wire mesh 6 mm x 6 mm stainless steel 316; Mosquito screen 2,3 mm x 2,3 mm stainless steel 304; Mosquito screen 2,3 mm x 2,3 mm stainless steel 316; Without wire mesh
Standardnettype Geen gaas
Extra options wall cover Curved; Lower blade; Door; Sill/threshold; Insect screen; Fasteners; Upper blade
Type of support LD.0065; LD.0195; LD.0240; LD.0440; LD.0460; LD.0995; LD.1250; SD.054; SD.100; LD.0070

Luftstrømsberegning

Specifikationer baseret på din beregning

Luftforskydning
kg/m³
m
m²
dB(A)
dB(A)

Ved målinger kan ristens reelle gennemstrømning afvige fra den teoretisk beregnede værdi. Derfor anbefales det ved riste med mindre end 6 lameller at vælge en rist, der er større end beregnet, eller at anmode om skræddersyet rådgivning.

Resultat

Brug for hjælp til dit valg?

Vores eksperter hjælper dig gerne med rådgivning, der er skræddersyet til dit projekt.